Long and straight, swept off the faceLace front
So the hairline shows natural when the first layer is pushed back. More detail: Lace Front Human Hair Wigs.
Lace frontRequest this combination
Long layered wigs · straight or loose wave · for wig stores
Long layered human hair wigs for the stores that fit long hair, in two textures: straight with layers, and a natural loose wave. The layers go onto a physical sample before anything is made in bulk.


One cut, two textures
Three of our 7 launch styles meet on this page. Long Layered is the cut: long lengths with layers that frame the face. Straight with Layers and Natural / Loose Wave are the two ways it is worn.
Long lengths with layers starting around the face and running down through the back, so the hair moves as one shape.
Request this style
Straight with LayersThe long layered cut worn straight. The layers show as clean steps at the face and a tapered outline at the back.
Request this style
Natural / Loose WaveThe same long cut with soft waves for body, without a set curl. The layers show as waves that separate at the sides and ends.
Request this styleCap features, combined on one wig: lace front, monofilament top, hand-tied cap, glueless fitting. Length, density and cap size for the long cut come from our supply data and are written into the approved sample. For shade comparisons, go to Wig Color Chart; the full set of seven styles sits on Human Hair Wigs.
The first layer
The first layer is the shortest piece at the front of a long layered wig, the one that frames the face. Where it falls changes the whole look of the wig on your client, so it is the first thing we fix on the sample.


The shortest pieces open around the cheekbone. The face reads framed and lifted, and the hair below falls long. Suits clients who want a softer face line and like hair moving near the face.
The first layer meets the jawline. It frames the face without covering much of it, and blends into the lengths quickly. Suits clients who want a layered look that stays easy to tuck behind the ear.

The layers start lower, so the front stays long and the cut reads close to one length with movement at the ends. Suits clients who want long hair first and layers second.

Layers: first layer down from cheek to jaw, front view.Front view
Layers: right side starts higher than left, front view.Front view
Only that point is recut on the revision, and its new daylight photos sit next to the first set so the two heights can be compared.
Once approved, the first layer position is part of that wig’s record. Bulk wigs are cut to that height, and the reference wig we file keeps the same face-framing for later orders.
Who orders them
The stores ordering long layered wigs from us fit long hair for clients who know how they want it to fall.
The wearers are mainly white women, often in blonde, rooted or gray shades. On fair skin under light hair, the face-framing pieces and the hairline sit right next to each other, so both are approved together on the sample.

A client tries the same shade with the first layer at the cheek and at the collarbone, and chooses on her own face.

Clients who wore long hair before hair loss get long layers back, on a light cap made for full-day wear.

The layers arrive where you approved them, and your stylist blends the front on the client.

You restock long layered wigs for several stores, each one cut to an approved sample.

You adapt the cut or sell a long-hair line under your own name.
Weight through the lengths · three places, three views
A long wig carries more hair than any other cut in the range. Without layers, that hair hangs as one heavy block from the crown to the ends. The layers take weight out of the lengths, so the hair falls closer to the head and the ends move when she turns.

Enough hair to cover the cap and hold a part, with no flat spot on top. Read in the part close-up and the front view.

Layers stepping down from the first layer, so the sides sit close to the face and shoulders instead of flaring out. Read in the side view.

Lighter than the lengths, so they separate and move rather than ending in a heavy line. Read in the back view.
The density field for a long layered wig is set from our supply data. On long hair, the same density reads differently depending on how it is layered: full at the crown, lighter by the time it reaches the ends. Your wig specialist talks through density and layering together before the workshop cuts the sample.
A hand-tied cap, often with a monofilament top, keeps a long, full wig light on the head through the day. Adjustable straps at the nape hold the length steady, and glueless fitting adds bands or clips. See Hand-Tied Wigs.
Layers: lengths too heavy at the sides, side view.Side view
Layers: ends too blunt at the back, back view.Back view
The revised sample takes weight out at the marked places only.
What you get: long hair that sits close to the face and moves at the ends, approved on a wig you have handled.

Request samples
Tell us the shade, the cap, straight or wave, and the first-layer point. The long sample ships with its daylight photo set.
Two textures
The cut is the same; the texture changes how the layers read and how the wig sits on your client.
Same shade, same first layer, two wigs.
Straight with Layers
Natural / Loose Wave| Point | Straight with Layers | Natural / Loose Wave |
|---|---|---|
| How the layers show | Clean steps at the face, a tapered outline at the back | Waves that separate at the sides and ends |
| First layer | Reads as a clear line at the cheek, jaw or collarbone | Blends into the first wave and reads softer |
| Body | Smooth and close to the head | More volume through the lengths |
| Hairline and part | Very visible, since straight hair lies flat | Waves around the face soften the hairline |
| Suits clients who | Want a sleek, polished long look | Want body and movement without a set curl |
| Read on the sample | Front view for the steps, back view for the outline | Side view for the wave, back view for the ends |
Stocking both textures in the same shade lets a client compare them on her own face. Each texture is its own combination with its own sample. A Honey Blonde Long Layered wig straight and the same shade with a loose wave come back as two wigs with two photo sets, and are approved separately.
Request Straight with LayersIf a client who wears the straight version wants the wave, the waved wig is sampled in the shade she already wears. Once approved it is filed beside the straight one, and the straight wig can still be reordered unchanged.
Request Natural / Loose WaveThe second texture
On a loose wave, two things decide the look: where the wave starts and how loose it is. Both are set on the sample, and both are what arrives.
From the mid-lengths, leaving the crown and face smooth, or higher, closer to the face. A wave that starts lower keeps the top sleek; a wave that starts higher adds more body around the face.

A soft, open wave that adds body without reading as a curl.
The first layer and the waves around the face are read together in the front view, so the face-framing stays visible.
The wave on your approved sample is the wave in the box. Your wig specialist confirms it before the sample is made, the side and back views record it, and dispatch check compares bulk and reorders with those views.
Layers: wave starts too high at the sides, side view.Side view
Layers: ends too tight, back view.Back view
A revised wave sample is made to those marks and photographed again.

Rooted shades like Dark Root Blonde and Caramel Balayage look different once the hair waves, because the light and dark strands turn as they move. The shade is therefore approved on the waved wig itself. More on rooted color: Balayage Wigs.

Cap combinations
Pairings for a long layered wig, matched to the way it is worn.
Long and straight, swept off the faceSo the hairline shows natural when the first layer is pushed back. More detail: Lace Front Human Hair Wigs.
Lace frontRequest this combination
Long layers after hair lossScalp-like part, light cap, nothing to glue. More detail: Glueless Human Hair Wigs.
Monofilament top · Hand-tied · GluelessRequest this combination
So a full, waved wig stays light.
Monofilament top · Hand-tiedRequest this combination
The part reads as scalp and the face-framing falls evenly on both sides. More detail: Monofilament Wigs.
Request this combinationSo the part and the face-framing can switch sides.
Request this combinationWhichever pairing you pick goes into the cap field, and the sample’s cap interior view shows where each feature begins and ends. All four features are compared on Wig Cap Construction Guide.

On a long wig, the layers decide how it sits on the face.

Mature clients
For mature clients who keep their hair long, these combinations work well:
Lifting the face line without cutting the length.
Grey / Salt & Pepper on long layers, the mix of gray and darker strands running the full length. Gray shades: Grey Human Hair Wigs.
Dark Root Blonde, Champagne Blonde or Beige Blonde, worn in the loose wave.
Lace front kept lighter at the edge, where a client’s own hairline has thinned.
A hand-tied body below a mono top, secured with straps or clips.
Long layers with a covered forehead are on Wigs with Bangs.
On your sample
The general sample process is on our home page. On a long layered sample, read these points photo by photo.
Where it falls, cheek, jaw or collarbone. Front view
The face-framing starts at the same height on both sides. Front view
How they step from the face to the back. Side view
Straight with clean steps, or a loose wave starting where you asked. Side view
Crown full enough to hold the part, lengths close to the head, ends light. Side and back views
Front
Side
Back
Cap interiorHow the layers taper and where the longest hair ends. Back view
With a lace front, the edge still looks natural when the face-framing is pushed back. Hairline close-up
With a mono top, the part stays clear of mesh even under the weight of long hair. Part close-up
Straps, fittings and size label holding the weight of long hair. Cap interior view
Write up whatever is off as layer, length, hairline, part, cap or fit, with a direction and the view it shows in; the revision returns with new photos.
A single request can cover a straight and a waved version together, for example Ash Blonde straight with the first layer at the jaw beside Ash Blonde in the loose wave. You receive two wigs and two photo sets.

Walk your wig specialist through the textures, shades and first-layer heights your clients request, and confirm the sample list that comes back.
Discuss Wig Details
Reorders
Restocked long layers that arrive with the first layer lower or the ends heavier look like a different haircut. The approved wig is how we stop that.
You keep the approved long layered sample. We file its matching reference wig and daylight photos by store, style, shade and cap.
Point to the approved sample by style, shade and cap. First-layer height, texture and weight are already on record.
A long layered style goes back to the partner workshop that cut its sample whenever possible. If it has to move, the new workshop’s sample is matched to the reference wig first, and bulk follows only after that.
A new first-layer height, a switch of texture or more weight taken out starts as a new sample. Once approved it gets its own reference, filed beside the original, and you can order either.
If a wig does not match its reference, it does not ship; About explains what happens next.
Side by side
| What decides a long wig | Human Hair Wigs Supplier | Typical stock long layered listing |
|---|---|---|
| Where the first layer falls | Cheek, jaw or collarbone, set on your sample | As the stock item was cut |
| Weight through the lengths | Layers and density read on your sample, marked under layers | Seen on arrival |
| Texture | Straight or loose wave, each its own sample and photo set | One texture per listing |
| What you judge it on | Your sample, with front, side and back views in daylight | Styled studio photos |
| Cap under long hair | Features chosen for hairline, part and weight | A fixed cap per listing |
| Reorders | First layer, layers and wave compared with our reference wig | Ordered again from the listing |
Custom and own brand
ODMTake the launch cut and change the parts you need: a higher or lower first layer, a lighter weight through the lengths, a wave instead of straight, another shade or cap. Anything you leave alone stays as the launch cut has it.
If your long cut is not one of ours, your wig specialist reads your images with you, one field at a time, before the workshop starts, taking the first layer from the front shots and the layering and wave from the side and back. Full process: Custom Wig Manufacturer.
A long layered SKU in your line equals one approved sample plus one reference wig, which makes a straight and a waved wig in one shade two separate SKUs. Labels, tags and packaging are agreed per order. Brand lines: Private Label Wigs.
What to send
Paste these points into the form or into WhatsApp.
Long layered wigs already approved are quoted by naming them. New combinations get a bulk price after their own sample is approved. Range ordering: Wholesale Human Hair Wigs.

Start here
Pick the long layered wig your clients ask for, and the layers go onto a sample first.
Shade, cap, straight or wave, first-layer height; daylight photos travel with the wig.
Both textures across a range, long gray layers for mature clients, or one long cut adapted for a single wearer.
Buyer type, styles, shades, quantity, destination and what you plan to reorder.